Publications

    Print This Page

    Refereed Journal Publications

    Ramaraj, T.C., Santhanam, S., and Shaw, M.C., Tool Fracture at the end of a Cut, Journal of Engineering for Industry (ASME Trans.), Vol. 110, pp 333-338, 1988.

    Chandrasekar, S., and Santhanam, S., A Calculation of the Bulk-Modulus of Polycrystalline Materials, Journal of Materials Science, Vol. 24, pp 4265-4267, 1989.

    Santhanam, S. and Shaw, M.C., Determination of Flaw Size Distributions by the Crack-off Process, Journal of the American Ceramic Society, Vol 73-10, pp 2922-2925, 1990.

    Santhanam, S. and Chandrasekar, S., Internal Pressure Test for Characterizing Fast Fracture Reliability of Grinding Wheels, Journal of Materials Science, Vol. 27, pp 3719-3725, 1992.

    Santhanam, S., Fracture Criterion for the Axisymmetric Disking Process, International Journal of Fracture, Vol.60, pp 65-77, 1993.

    Santhanam, S., Stress Intensity Factors for a Crack in Planar Disking, International Journal of Fracture, Vol.60, pp 19-32, 1993.

    Santhanam, S., Infinite Periodic Array of Cracks in Axisymmetric Disking, International Journal of Solids and Structures, Vol.30, No.6, pp 739-749, 1993.

    Gong, H., Jen, K.P., Majerus, J.N., and Santhanam, S., Analytical / Numerical Solutions for a Single Hole-Edge Crack in a Wide Plate under Pure Bending, Engineering Fracture Mechanics, Vol.46, No.5, pp 743-749, 1993.

    Santhanam, S., Majerus, J.N., Jen, K.P., and Karanth, D.S., Analytical / Numerical Solutions for a Single Hole-Edge Crack in a Narrow Plate under Pure Bending, Engineering Fracture Mechanics, Vol.46, No.5, pp 751-761, 1993.

    Majerus, J. N., and Santhanam, S., Anisotropy in Fracture Behavior of Thin AL 7075-T651 Plates, Engineering Fracture Mechanics, Vol.56, No.3, pp 437-440, 1997.

    Santhanam, S., An Elastic-Viscoplastic Constitutive Model for the Hot- Forming of Aluminum Alloys, Journal of Materials Science, .Vol.35, pp 3647-3654, 2000.

    Santhanam, S., A [90/0]s  Composite Laminate with Part-Through Matrix Cracks in adjacent Plies, Composite Structures,Vol.53/4, pp 499-509, 2001.

    Pegada, V., Chun, Y., and Santhanam, S., An Algorithm for Optimal Blank Design for the Deep-Drawing of Aluminum Cups,’ Journal of Materials Processing Technology, 125-126F, pp 743-750, July 2002.

    Santhanam, S., An Improved Model for Disking, Journal of Materials Processing Technology, Vol.124/1-2, pp 192-199, July 2002.

    McLaughlin Jr., P. V. D, and Santhanam, S., Simulating Damage Growth in a [90/0]s Composite Laminate Using Quasi-2D Finite Element Methods, Composite Structures, Vol.58/2, pp.227-236, Nov. 2002.

    Santhanam, S., A method to Extract Interface Stress Intensity Factors for Bimaterial Problems Using Interlayers,  International Journal of Fracture, Vol. 135, pp 137-159, 2005.

    Vahdat, V., Santhanam, S., and Chun, Y. W.,  A Numerical Study on the Use of Drawbeads to Minimize the Earing Defect in Deep Drawing,  Journal of Materials Processing and Technology, Vol. 176, pp 70-76, June 2006.

    Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., Toughening Behavior in

    A Carbon Nanotube Reinforced Silicon Nitride Composite, Materials Science and Engineering: A, Volume 491, Issues 1-2, pp 224-229, September 2008.

    Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., The Effect of Nano-Sized Sintering Aids on Toughening Behavior of Silicon Nitride, Journal of Materials Science, Vol. 43, pp 2799-2805, April 2008.

    Karkamkar, N., Santhanam, S., and McLaughlin, P.V., The Use of Interlayers in Modeling Interface Crack Propagation in Laminated Composites, Engineering Fracture Mechanics, Vol. 75, pp. 5087-5100,  December 2008.

    Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., The influence of Nano-Micron Powder Blends on the Microstructure and Mechanical Properties of Silicon Nitride, Advances in Applied Ceramics, Vol.108, No.3, pp.167-173, 2009.

    Conference Proceedings/Presentations

    Santhanam, S. and Shaw, M.C., Flow Characteristics for the Complex Stress-State in Metal-Cutting, Annals of CIRP, Vol. 34-1, pp 109-111, 1985.

    Ramaraj, T.C., Santhanam, S., and Shaw, M.C., Brittle Fracture of Tools, presented at the 13th Conference on Production Research, Univ. of Florida, Nov. 1986.

    Santhanam, S., and Shaw, M.C., Precision Crack-off of Brittle Materials, presented at the 14th Conference on Production Research, Univ. of Michigan, Nov. 1987.

    Shaw, M.C., Ramaraj, T.C., and Santhanam, S., The Role of Fracture in Metal-cutting Chip Formation, presented at the Inst. of Metals Conf., Stratford, England, Nov. 1988.

    Santhanam, S., and Chandrasekar, S., Internal Pressure Test for Testing Fast-Fracture Reliability of Grinding Wheels, 90-WA/DE-8, ASME Winter Annual Meeting, Dallas, Nov. 1990.

    Santhanam, S., and Mayasandra, S., Statistical Reliability Prediction of Cutting Tools: Continuous Cutting Conditions, Transactions of NAMRI/SME, pp 142-147, 1991.

    Prakash, G., and  Santhanam, S., Disking-A Process for Cutting Glasses and Ceramics," Annual Meeting of the American Ceramic Society, Minneapolis, April 1992.

    McLaughlin, P.V.D., Deshpande, S.M., Futato, L.D., Santhanam, S., and Beaumont, P.W.R, Three-Dimensional Damage Growth in Composite Laminates using Quasi-Two-Dimensional Finite Element Methods, Proceedings Eighth Technical Conference American Society for Composites, pp 693-702, October 1993.

    Futato, L.D., Santhanam, S., McLaughlin, P.V.D., Issues Related to Delaminations in a Quasi-Two-Dimensional Finite Element Study of Damage Propagation in Laminates, First International Conference on Composites Engineering, New Orleans, August 1994.

    Santhanam, S., Interface Effects in Disking Fracture, Appeared in PED Vol.68-1, pp 461-468; presented at the International Mechanical Engineering Conference and Exposition (formerly ASME Winter Annual Meeting), Chicago, Nov. 1994.

    McLaughlin, P. V. D., Santhanam, S., and Kannampully, S. P., Finite Element Approximation of Mode II and III Off-Axis Delamination Growth in Composites, Proceedings, ICCE/4, Fourth International Conference on Composites Engineering, July 6-12, 1997, pp. 649-650.

    Murthy, K.S.S., Dutta, P., Bala, S., Raman, K.S., Santhanam, S., Effect of Shielding-Gas and Heat-Input on the Microstructure and Mechanical Properties in Flux-Cored-Arc-Welding of Low-Carbon-Steels, Sixth International Conference on Trends in Welding Research, June 1998, Atlanta.

    Santhanam, S., and Bose, S., ‘Constitutive model for shape memory alloys and its use in design and finite element analysis,’ Proceedings of  SPIE's 9th Annual International Symposium on Smart Structures and Materials, San Diego, March 2002.

    Pegada, V., Chun, Y., and Santhanam, S., An Algorithm for Optimal Blank Design for the Deep-Drawing of Aluminum Cups,’  Presented at the 9th International Conference on Metal Forming, Birmingham, England, September 2002.

    Santhanam, S., A Method to Extract Interface Stress Intensity Factors, Proceedings of the ASME Applied Mechanics Division, Orlando, FL, p 397-405, 2005.

    Vahdat, V., Santhanam, S., and Chun, Y.W.,  A Numerical Study on the Use of Drawbeads to minimize the Earing Defect in Deep Drawing,’ Proceedings of the NAMRC 33, p 383-390, 2005.

    Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., Enhancing Toughness of Silicon Nitride with Nano-Sintering Aids, 31st International Cocoa Beach Conference on Advanced Ceramics and Composites, Daytona Beach, FL., January 2007.

    Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., Toughening Behavior in a Carbon Nanotube Reinforced Silicon Nitride Composite, 2007 MS&T Conference, Detroit, MI, September 2007.

    Carney, K.S., Lee, R.S., Goldberg, R.K., and Santhanam, S.,  A Heterogeneous Constitutive Model for Reinforced Carbon-Carbon,’ SAMPE Fall Technical Conference, Cincinnati, OH, Nov. 2007.

    Santhanam, S., Jen, K.P., and Wing, Z.N., Enhancing Toughness of Silicon Nitrides with Nanoscale Additions, 2008 IMECE, Boston, MA, Nov. 2008.

    Santhanam, S., Chun, Y.W., Alaways,L.,  Assessment of ABET Program Outcomes through Capstone Design, 2009 IMECE, Orlando, FL, Nov. 2009.

    Caverly, R., Fulmer, H.F., Santhanam, S., Singh, P., Jones, G.F., O’Brien, J.O., Weinstein, R.D., Char, E., Mercede, F., Yost, J., Project Based Freshman Engineering Experience: Core Course,  2010 ASEE Conference, Louisville, KY, June 2010.

    Van Treuren, K., Kirk, D., Tan, T.M., Santhanam, S., Developing the Aerospace Workforce: A Boeing Experience, 2010 ASEE Conference, Lousville, KY, June 2010.

    Jen, K.P., Deshmukh, S., Santhanam, S., Comparison of Silicon Nitride nanowires synthesized by silica nanopowders and silica gel, MS&T 2010,  Houston, TX, October 2010.

    Pellicone, D., Qato, L., Jones, G.F., Santhanam, S., Dougherty, E.,  Viscous Energy Dissipation for Blast-Protection Structures, 2010 IMECE, Vancouver, Canada, November 2010.