Undergraduate Research Assistants
|
|
 |
Rebecca Weigand, Class of 2013
"Experimental Study of Nanofiber Settling in Paraffin."
|
 |
Lorelle Suriano,
Class of 2013
"Experimental Study of Nanofiber Settling in Paraffin"
|
|
| |
|
|
|
NovaTherm BSME Graduates
- Chris Burns, Class of 2012, “Data Reduction of Thermal
Cycling Experiments of Shape-Stabilized Phase Change Materials.
- Tim Thomas, Class of 2012, “Data Reduction of Thermal
Cycling Experiments of Shape-Stabilized Phase Change Materials.”
- Sean McIntosh, class of 2011, “Development of a vacuum
assist system to enhance PCM penetration into carbon foam.”
- Caitlin McEntee, class of 2011, “Heat Transfer from
a Porous Foam Heat Sink to an Impinging Round Jet.”
- Kelsi Bendenelli, class of 2011, “Heat Transfer from
a Porous Foam Heat Sink to an Impinging Round Jet.”
- William McCann, class of 2010, “Development of a vacuum
assist system to enhance PCM penetration into carbon foam.”
- Elizabeth DiBella, class of 2010, “Fluid Dynamics of
an Round Jet Impinging on a Porous Media”
- Brian McManus, class of 2010, “Investigation of conductivity
enhanced PCMs as a thermal interface material.”
- John McCloskey, class of 2010, “Determination of the
thermal properties of PCM enhanced window panels for energy
efficient buildings.”
- Ian Azerdo, class of 2009, “Fluid Dynamics of an Round
Jet Impinging on a Porous Media”
- Patrick McGrath, class of 2008, “Flow Mechanics of an
Air Jet Impinging on a Pedestal”
- Ron Warzoha, class of 2008, “Thermal analysis of a 69
kV Solid State Current Limiter.”
- Erik Martin, class of 2008, “Design of a Chemical Vapor
Deposition Chamber for Thin Film Deposition.”
- Neal Dillon, class of 2008, “Design of a High Heat Flux
Thermosyphon.”
- Patrick Loerch, class of 2008, “Numerical Analysis of
the Thermal Impact of Solder Voids and Correlation with
Thermal Images.”
- Adriano Hauck, class of 2008, “Effective Thermal Conductivity
Modeling of Thermal Vias.”
- John Duda, class of 2007, “Flow Mechanics of an Air
Jet Impinging on a Pedestal.”
- Francis Lagor, class of 2006, “Flow Mechanics of an
Air Jet Impinging on a Pedestal.”
- Kerry Kamon, class of 2005, “Use of Infrared Thermography
in Thermal Management of Electronics.”
- Matthew Voorhees, class of 2005, “Use of Infrared Thermography
in Thermal Management of Electronics.”
- Brian Comber, class of 2005, “Thermal Proximity Effects
of Packaged RF High Power Amplifier Discretes.”
- Michael Nyhan, class of 2005, “Mitigation and Detection
of Thermal Signatures of Unmanned Surface Vehicles.”
- Anthony Reindl, class of 2004, “Natural Convection from
Two Heat Sources Maintained at Different Temperatures on
Multiple Printed Circuit Boards.”
- Adrienne Darr, class of 2004, “Experimental Investigation
of Phase Change Materials for Thermal Management of Naval
Electronics.”
- Christina Turka, class of 2003, “Natural Convection
from Two Heat Sources Maintained at Different Temperatures
on Multiple Printed Circuit Boards.”
- Craig Iwano, class of 2003, “Natural Convection from
Two Heat Sources Maintained at Different Temperatures on
Multiple Printed Circuit Boards.”
- Jared Harvest, class of 2003, “Natural Convection from
Two Heat Sources Maintained at Different Temperatures on
Multiple Printed Circuit Boards.”
- Kimberly Krug, class of 2002, “Natural Convection from
Two Heat Sources Maintained at Different Temperatures on
a Single Printed Circuit Board.”
- Thomas Kopec, class of 2002, “Natural Convection from
Two Heat Sources Maintained at Different Temperatures on
a Single Printed Circuit Board.”
|
|